How to settle for the right battery

We all have a genuine requirement for power onboard and best marine battery is a standout amongst the most critical crew members. It's not encouraging, yet it's a reality: batteries degrade as time goes by so at some point, you may consider purchasing another one. It's critical that you pick the correct best battery for trolling motor. This brings up the question...which is the correct one? It's extremely hard to choose as there are innumerable decisions. The most essential factor that you should consider is the reason for the battery. Do you require a battery just to start the boat or you need one to run the different eager for power hardware onboard? In most cases, it could be both. As indicated by the request of utilization, essentially there are three kinds of marine batteries:
  • Cranking battery,
  • Deep cycle battery,
  • Dual purpose battery.

Other essential contemplations before acquiring a new battery are:

  • Technology (flooded, gel, AGM; gel and lithium battery for trolling motor are maintenance-free sealed batteries),
  • Output (marine cranking amp rating, reserve capacity rating, cold cranking amp rating),
  • Weight (choose the battery with average weight to be able to move it in and out),
  • Battery group, i. e. battery’s physical size (make sure the battery perfectly fits in the battery box),
  • Battery capacity (Ah rating),
  • Warranty.

Cranking or starting marine battery

These kinds of batteries offer high blasts of intensity for brief timeframes to kick over your engine and power your pontoon. The cranking battery sends electricity to the motor when the start switch is activated. Starting batteries are created to put out a lot of current for a brief timeframe. A cranking battery has more quantities of lead plates that are more slender and with more surface region to give the essential power.

Power or deep cycle marine battery

If you are hoping to onboard gadgets and accessories, then the deep cycle battery was made for that purpose. Best deep cycle battery puts out little measures of juice for an extended stretch of time. It can deal with long discharge cycles while the engine is not on. A deep cycle battery comprises of less lead plates that are thicker to give constant power yield over an extended period.

Dual purpose or hybrid marine battery

It's a hybrid battery that has been designed in a manner that it can serve in a way it can be utilized as both deep and cranking cycle. Double purpose batteries are kind of a mix of properties of the two. In the same way as other 2-in-1 choices like interstate marine battery, they don't generally enable your boat to perform at the same level as two batteries would. When purchasing another battery, bear in mind to reuse your old one. Lead acid batteries can be recycled when done in the right facilities and in the proper way.

Battery monitor is your battery's closest companion

Marine batteries can stand the test of time and has an enduring level that is way better than other batteries: long hours without a recharge, seasonal use, pounding waves. Investing in a battery screen arrangement like Simarine Pico to extend your battery's life expectancy just bodes well. A lot of batteries are either chronically over-charged or chronically under-charged which makes them die. Utilizing Simarine battery monitoring arrangements you can:
  • know the batteries' temperature,
  • know the batteries’ voltages, charged and empty,
  • measure input and output currents,
Information is brilliant and there is never an excess of information about your battery. In any case, if you discover that you are replacing your batteries more often than you ought to, check and redesign your electrical system.

Types of Shaper and How to Use a Shaper


The shaper is a specialty woodworking machine utilized for profiling the rims of parts of wood. Commonly speaking, they’re marketable tools, though it’s not unusual to discover them in specialized woodworking shops. Even a tad home woodworkers have economical shapers in their workspaces.

How to Use a Shaper

  1. A shaper’s fence is somewhat at all times fixed with a screw thread, unlike a router table, which often has locks past the table top.
  2. There is a detached locking screw, with a grip, to keep the fence in position.
  3. All of this is regulated off of a casting that is also the dust catcher and grips the guard.
  4. Each side of the fence is separately regulated, permitting micro-adjusting for complete backing of the work piece on both sides of the cutter.
  5. Shapers expend a vertically-mounted motor driven spindle to clasp the cutting gears.
  6. The spindles are crafted, so compound cutting tools can be attached on the same shaper combined.
  7. The spindle is then upstretched and dropped through the table, letting for the dissimilar cutting tools to move to the work piece.
  8. Work pieces are glided past the table to be sawed.
  9. All shapers are importantly the same, differing mainly in size.
  10. When we talk about a shaper’s size, there are numerous points to be pondered upon comprising motor size, spindle size, and table size.
  11. Best Drill Press With Reviews in 2016
  12. best benchtop drill press

Types of Shaper

A shaper is machine utilized for creating flat surfaces on the provided work piece. It can also be expended for performing any kind of machining operations but with little trouble. The shaper saws the materials by responding motion of the tool hauling ram. We have cited 10 kinds of shapers for your advantage.

The Crank Type Shapers

In this, a lone point cutting tool is engaged to do the function. A crank is linked to the ram and the bull gear to which the power is provided through a separate motor. The responding length of tool will be at all times, equivalent to the length of stroke.

The Gear Type Shapers

In these shapers, a rack and pinion is used. The rack is fixed to the lower portion of the ram and on which the pinion shifts. The power is transferred from the bull gear. A grain train is involved for the transmission of power from the bull gear to pinion.

The Hydraulic Type Shapers

These shapers work on hydraulic power. One of the major benefits of this shaper is that continuous velocity can be accessed from the beginning of the machining operation. Another vital pro of this shaper is no sound will be generated.

The Horizontal Shapers

These shapers have the signal of ram beside the horizontal axis. This sort of shapers is generically expended for generation of fine and level surfaces.

The Vertical Shapers

In these shapers the tool comprising ram has its motion in vertical course. In vertical shaper, the ram might be propelled by numerous kinds like screw driven, gear driven, crank driven, or by hydraulic power. Vertical shaper has an extremely strong table which can have cross, longitudinal, and rotational movement.

The Traveling Head Type Shapers

This sort of shaper is mainly engaged for machining very big objects that cannot be attached on the table of the machine and cannot be shifted. In this machine, the ram having reciprocating movement also gives crosswise movement instantaneously.

The Standard Shapers

In this shaper, the table contains just two movements i.e. vertical and horizontal. The table might or might not be backed on the other end.

The Universal Shapers

In these, shapers on top to the aforementioned two movements of the normal shaper, bid two more tracks.  Increasing the table about an axis ram ways and the table can be slanted about an axis vertical to the 1st one.

The Push Type Shapers

In this, the metal is eradicated when the ram is turning away from the column. This kind of shaper shoves the work piece, while eliminating the work piece away from it.

The Draw Type Shapers

In these machines the metal is confiscated from the work piece, when the ram is turning towards the column. So, due to this work piece grabs a force in the course concerning the column of the work piece and the forces past the column and bearings get somehow decreased. The vibrations on machine gears also get curbed to a certain extent.

The Guide to Install a CD player in a Golf Cart

Cd player install in a golf cartCarts have been always utilized to go around the golf courses since 1951. A number of golf cart possessors have begun to expend their carts to jaunt around their neighborhoods, around their area or at their work stations. With higher golf cart usage, this has become a growing desire for the possessors to install entertainment based gadgets like radios and CD players in their cart. The installation could be completed in a day, even if done by an average person and without having to install a surplus battery set in your cart.

The Importance of a Radio Console Adapter

Purchase a radio console adapter for your golf cart to deliver a pre-molded place for your CD player, so you don’t really have to slice into the body of your golf cart. Dislodge your drink and center console by detaching the factory installation rods and swap it with your news console. 

The Perfection You Need To Attach a Ground Wire

Place a ground wire from your stereo unit to an attachment on the frame of your golf cart. One of the biggest fears when you are installing a CD player in your golf cart is not correctly grounding the assembling. Make sure your ground wire is perfectly connected to the frame bolt before continuing further.

Talking About On/Off Switch

Attach two red wires to the positive station of the end battery in your cart’s battery set. Attach one to the memory hot wire on your radio and shield the connection with the coating of an electrical tape. Operate the second hot lead to an on/off switch and carry on the operation to the main power cable on the radio. Keep the switch in the off status. This would be the switch to expend when you wish to listen to the radio.

The Method to Install the Stereo Speakers

Affix your stereo speakers expending the bolt-on connections that land with golf cart speakers. Then operate the negative and positive wires from the CD player to every single speaker. Your CD player will contain two detached groups of leads for the two speakers.

Test Your Stereo Speakers

Attach the CD player and the on/off switch in your novel golf cart dashboard. Then switch the on/off plug to the “on” status and try to sample your CD player.

Precautionary Rules

Don’t overlook to attach the ground wire from your CD player to the chassis or frame of your golf cart.

Swift Barrier for Drill Press or Band Saw

You don’t arise through a barrier on the rear of the tool particularly when it reaches to bench highest bore presses, plus countless band saws. My band saw isn’t inexpensive at all besides it is not the most dominant as well. It has no barrier but a miter measure. Obviously, many folks form a fence for their machineries. Nonetheless on behalf of those individuals, I for one that requires so many various presentations, work with this rapid as well as stress-free key that you can likewise, plus it succeed healthy. All you are required is a lock, quantifying tape and a rate square.

After finished determining where the rate square must move to work as your barrier on the bore press, later push the flange on the square opposed to the face of the table on the bore press. You will have a fence that puts up in instants, only if you lock it on the flat bar that goes throughout the lowest of the trio, as it sits level on the bore press table.  


Creating Your Personal bar Clamps

1. For a range of various assignments counting glue ups, box assembly, plus numerous other requests bar clamps are vital to every woodworking shop.

2. These clamps are well-known as F-clamp otherwise Pace Clamp. These clamps have F like shape as well as the reason for having the name F-clamp.

3. The bar clamp is alike to the C clamp, however manages to possess a deeper throat, plus is typically fairly a tad lengthier.

4. When you are attempting to create a lasting accessory using bolts and/or adhesive, a bar clamp would be required for woodworking.  

5. The clamp is plain also has 3 pieces, 2 horizontal bars as well as they are joined by a vertical bar.

6. This might not permanently be the instance when the clamps you obtain typically have a bolt that you can work with in order to strengthen the bottommost bar to the Woodstock that you are dragging mutually.

7. These clamps remain so beneficial to any woodworker that they can be used on huge substances and are adaptable as well and that is the chief feature of these clamps.

8. The C-Clamp is not variable to an enormous amount, like these clamps are and thus bringing versatility to these clamps.

9. With bar clamps, you can use abandoned pieces in the shop to construct your personal while pipe clamps are used in stick ups, plus supporting huge matters as well.

10. In conclusion, these are several of the plainest clamps that you can create yourself, plus again, via remainder wood that you have placed about the shop, one of the reasons never to throw away your remainders, even the minor bits.


Let’s Have a Battle between Batteries


This is an irrefutable truth that rechargeable batteries were one step onward to the whole innovation of battery. The two embodiments there sealed rechargeable or else flooded batteries and sealed maintenance free, equally have outstanding benefits in their presentations, extending from the automobiles to power supply networks.

Rechargeable Batteries and Their Impact

To make a rechargeable battery, numerous chemicals are required. Typically the superior models expend a mixture of lead and sulfuric acid. This kind of battery has the ability to become recharged when it approaches in link with a converse current. A rechargeable battery is fairly forceful for its mass and structure throughout partial of worldwide battery trades. At the moment, in this column, we will debate on some rudimentary ideas connected with submerged battery and closed maintenance free battery and which single is the finest one. So, study on.

What Is Flooded Rechargeable Battery?

• Flooded rechargeable battery, in other words known as wet-cell battery, comprises a liquid blend of water and sulfuric acid. It is normally pricier and much long-lasting than the sealed battery.

• Great conservation is necessary for flooded rechargeable battery and its corresponding items. As it comprises liquid, you want to be truly cautious while managing it; or else due to potent steps forward it is capable of getting damaged.

• Steady maintenance can make this kind of battery to act finely. In dangerous weather, this battery is susceptible to getting impaired or deceased, for the reason that the water within the battery can be vanished or chilled. Then as the water will be dissolved sooner or later even in balmiest weather, the battery must simply be exhausted with appropriate aeration.

• In spite of these necessities, flooded rechargeable battery is the decent select in stock power uses. Correspondingly, it is largely expended for power standby, usefulness, telecom, and grid energy stowage, golf cart, trolling motor, solar energy and further.

What Is Sealed Rechargeable Battery?

This kind of battery does not hold any liquid that will tumble out if the battery breakdowns, not like flooded rechargeable battery. This is too recognized as maintenance free battery. The main two sorts of sealed rechargeable batteries are AGM (Absorbed Glass Mat) and Gel. Gel battery has a putty sort of material, while AGM battery encompasses exceptional acid-saturated fiberglass mats. AGM battery is fairly potent and much price efficient than gel batteries, though gel batteries deliver extra durability.

The Main Advantages

The chief benefit of a sealed maintenance free battery is the electrolyte within it is totally immersed in the divider and does not need water to be inserted. It does not require consistent care or airing, and can fight diverse weathers in an improved mode than the flooded ones. This too inclines to charge quicker than a flooded battery.

What Should You Pick?

Sealed maintenance free (SMF) battery is frequently depleted as inverter battery. Likewise, it is expended in off-grid power schemes, automation, and certain ATVs and motorbikes. Surprisingly, the batteries accomplish equally significant tasks and are extremely valuable for us. Though, this is also right that expending sealed maintenance free batteries is easier and stress-free. So, purchase a rechargeable battery now, regardless if it is submerged or SMF, according to your want. The battery that is contrived by including the grander Japanese technology is the faultless variety to select.

Fantastic stallion prospect sired by super mover Klerkur frá Bjarnanesi!

Lakkris is 5-gaited stunning 2 year old black stallion with all the assets to become the next superstar: Very well built, long arched neck, long legs, good topline, and great movements. His great leg lift comes so natural in all gaits and you can only imagine how much he can improve later in his life under the saddle, when he gains more power, strength, confidence and balance.

Lakkri’s father is Klerkur frá Bjarnanesi. Klerkur is is a real Gæðingur who received nothing but dream marks for his ridden abilities: 9.5 for trot, 9 for walk, tölt, slow tölt, gallop, canter, spirit, and general impression. His total result for ridden abilities is 8.46 as a 4-gaiter! Klerkur is a son of the famous Glampi frá Vatnsleysu and inherited his unbelievable big movements. Glampi was evaluated with 8.35 in total and 8.68 for ridden abilities with 9 for trot, spirit, and general impression and 8.5 for tölt, gallop, canter, and walk. In 2006 Glampi received 1st prize for hi offsprings. Klerkur’s mother is Snælda frá Bjarnanesi, 1st prize mare with 8.24 and 8.51 for ridden abilities as a 4-gaiter (9.5 for trot, gallop, and spirit, 9 for tölt).

Klerkur has proven himself as competition horse as well and, amongst others, won the Gæðingakeppni B-Class (four gait) at Fjórðungsmót of East Iceland 2013 with 8.96. His highest result for Gæðingakeppni B-Class is 9.12, though, received in 2012 at Félagsmót Hornafjörður. Klerkurs highest marks for Four-gait V1 are 8,07 in master class and 7,93 in Tölt T1. Klerkur and both his parents, Snælda and Glampi, took part in Landsmót finals in B-Class.

Lakkris’ mother is Náttdís frá Smáratúni, daughter of Sikill frá Sperðli (8.34 in total) and Nótt frá Meðalfelli (7.73 in total). Through her mother Náttdis has the famous Kolkuós-blood in her veins. Náttdís herself is five gaited and passed the pace on to her son Lakkris.

Lakkris is a fantastic prospect for breeding and sport.He is your chance to aquire an exceptionally good youngster for a very reasonable price, and start forming your next superstar yourself in the near future
Video of him here
More information in private message.

2 1

MAHA MAGAM 2016 – Part I


The ‘ Mamangam ‘ (Mahamagam) is always very interesting when it happens every 12 years.

I was lucky to have had my first 2 mamagam’s at our village Baburajapuram right at the entrance of Kumbakonam. Just a few meters away from our village is where the private transport was terminated in 1968 and in 1980 and one has to walk around 3 kms to reach the ‘mamanga’ kulam to take the bath.

In 1968 my ‘Thatha’ (Grand father) the illustrious Shriman. Subbaraya Iyer was alive and the whole family (my aunts and their families, the illustrious son Shriman. Pattabiraman Iyer (my father) and his family (total including the new born baby and the last child of my parents) my chithappa (Atchay Rajni‘s grand father) and the entire village celebrated the mamangam with happiness and pride. This is a life time event for everyone in the Tanjore and Kumbakonam districts. This unity cannot come again.

Anyone can come and stay in anyone’s house and enjoy their hospitality is the custom. So, our house was surrounded with around 80-100 in numbers and the kitchen was working almost 24×7. You can have coffee at as early as 04.00hrs. The whole family was commended by our Grand Father.

At the wink of an eye of my Grand father, kudiyanavan’s (people who work for our lands) will instantaneously execute his commands to fineness.

My father will not stand in front of my Grandfather but I was always sitting on the lap of my Grandfather. You can imagine how odd this would have been but that was the way the families were run. My aunt’s daughters and sons will promptly obey the command of my father (their uncle and mami) and they love him and my mother so much.

It used to be a real feast for every meal and all laced with varieties and one has to sit in ‘Pandhi’ to eat every meal. I was there for almost 2 weeks well ahead of the beginning of the festival and returned in Ambassador car at the end of the whole event.

The Best Deals to Drill Holes in Glass

Entirely all of the numerous glass bores are intended to be worked wet. We propose consuming a battery-operated device; or else adopt more caution to evade electrical jolt during drilling in a damp condition.

At all times allow the bore to do the labor. Exert moderate force and maintain the bit as upright to the glass exterior as probable. A drill press add-on for a battery-operated drill is a practical assemble, if you want to be ensuring many openings.

2-in-1 diamond drill bit

2-in-1 diamond drill bit

Types of Drill Choices

  • The Micromite Drills: For the minutest holes
  • The Glastar Drills: Impeccable for consumption in your battery-operated drill.
  • The Inland Core Drills: Uppermost class for construction drilling
  • The Gryphon Core Drills: Cost-effective optimal if you aren’t organizing fabrication job

The Micromite Drills

Micromite Drills are reedy cords treated with diamonds at one edge. Soundest expended through a Dremel Gizmo instead of a typical workspace drill. Be vigilant to put on extremely tender weight using these lightest drills to dodge breaking them. Micromite Drills are vended in a package of three, alongside directions for correct usage. Micromite drills are frequently used in jewelry employment since they create the minutest punctures.

The Glastar Drills

Glastar Drills would equip several hand drills, battery-operated rather. These are speedy and comfortable to operate. Once more, hold the bit watery and use mild compression and you can acquire lots of holes from the entire bit.

The Core Drills via Inland

Sunshine supplies a wide assortment of Core Drills prepared in the USA by Inland Craft. Every drill has 3/8″ width shaft and an expulsion port to get rid of wedged plugs.

Practice in whichever drill you wish to by using 3/8″ or bigger wedge. Usage of a drill press is unrequired, nevertheless in certain circumstances, as soon as drilling heavy stuff or bigger openings; you might discover a drill press stress-free to function. Bear in mind to hold drills continuously wet for top effects and extensive drill phase.

Practice Core Drills To:

  • Bore holes in clock surfaces
  • Pierce hollows in glass, rock, ceramic piece, marble, fiberglass, plastics, porcelain, plus further
  • Puncture dangling holes in sheets
  • Exercise holes in jewelry chunks
  • Drill breaks in kaleidoscope maneuvers
  • Create entree cavities for passages and wall controls in mirrored partitions

The Core Drills via Gryphon

Consume in whichever drill you want by means of 3/8″ or bigger block. Usage of a drill press is not essential, however in particular circumstances, once drilling heavy objects or bigger holes, you could hit upon this that a drill press is comfortable to practice. Keep in thoughts to preserve drills always moist for superlative fallouts and lengthier drill life expectancy.

The Twofer Core Drills via Aanraku

Work this bit in every drill press or else hand drill.  In case of drilling by means of a hand occupied drill, be surefire to hold the bit perpendicular, upwards and downwards.  Irrespective of which drill you practice, be definite to keep up the bit damp all the time, to get around current shocking the lead crystal and for inordinate bit get-up-and-go.

Dear Jesus

Dear Jesus
Christmas is almost here, am so honored to be alive hale and hearty. I am a sinner not worthy to call on your name but your grace has made it possible. Your birth brings new hope for the world, your birth proves that with all that is going on in the world gay rights, terrorism, climate change, there is still a light to look to amidst all the darkness, I wanna thank you because of what you do for everyone time and time again. I wanna continue to lift up my family, friends, loved ones, relatives and even those who don’t like me unto you. Give them all a special Christmas miracle, and continue to be with them always, you know their aims and aspirations grant it unto them according to your plan and purpose for their lives. To all the children of the world Jesus be with them. To all leaders of the world Lord show them what to do. Give us all a loving and grateful heart. To all victims of war, conflicts, upheavals, discrimination, famine, be with them and please send them some Christmas cheer, to all migrants and victims of Muslim discrimination Lord stand in the gap for them, to all destroyers of peace, creators of conflict, and people with so much hatred in their hearts grant them peace from within and give them a loving heart. To those who fell victim to the Ebola virus grant them eternal rest and be with their family members. Lord to those looking for love give them love, those looking for the fruit of the womb please bless them with children, to those looking for a husband or wife please connect them with their missing rib, to those looking for jobs grant them a gainful employment, to the sick in hospitals and in homes grant them your healing, to those in need grant them your provision, to those seeking academic excellence let flying colors locate them, to those looking for promotion propel them forward, Lord fix all broken homes which the devil has infiltrated, to those seeking your face for reasons I could not mention please grant them their wishes. And to my very special friend BN grant him everything he asks of you and thank you for giving me a friend like him, may joy, laughter, favor, blessings, and protection, always surround him, ilu. Merry Christmas to you all, may the Christmas spirit take us right through to the new year. Happy birthday Jesus and 2016 here we come.

2016 will be even better

I have come a long way in the last two years. I have built my own self esteem up to the point that I finally am in love with myself. A year ago when I finally came to terms with who I was, I asked the universe to send me men who were crazy for me and loved the way I was! And like magic it happened! I was meeting man after man who were totally crazy for me the way I was. But none of them were wanting relationships so I changed my thoughts and asked the universe to send me the man who is everything I wanted in a man who also would love me. Two weeks later I met Malcom. I fell in love with him. He wasn’t perfect I’m not sure if anyone is perfect, but again something was missing. I wasn’t feeling loved, appreciated, or even accepted. We fought over this a few times as couples fight and make up. But tonight I realized I wasn’t happy, I am worth much more. I deserve someone who thinks the world of me, loves me unconditionally and is supportive in EVERYTHING I do and adores me for EVERYTHING I am. Yes I am selfish in this because in this part of my life I should be. NOBODY can ever rip up the foundation I built within myself. I know I am perfect just the way I am. My flaws make me strong, my imperfections give me character. I am the most loving most patient most caring person and I deserve to be treated as such. So Malcom and I broke it off in our latest argument. I will spend the holidays with loving family and move forward. The universe is going to bring me everything I desire and I will meet my future love of my life very soon I can feel it. 😃😃😃😃 life is amazing and I am grateful for many things. I do not let the hurt and pain fester but I make room for beautiful people and wonderful opportunities. 2015 has been amazing and I know 2016 will be even better.

Please do not reply with sorrow or sadness if you wish to comment please send happiness and joy as those are what I need and want. And I wish everyone in my life to be filled with the happiness and joy they deserve as well.

Just because I don’t sleep much here is my daily prayer

Christmas has become the most commercialized holiday ever, have we forgot about the real reason we celebrate Christmas,
This is to celebrate the birth of Jesus. To know what Mary and Joseph had to go though just so they could have what would be our savior. The baby that grew up to died for us.
Are we showing our children that it is ok to want and not give. Show them there are children and adults that have never got a present or a tree or a holiday meal, some of these kids are luck to get any meals.
Not to make the rich richer, these big department stores are playing on the middle class to make their kids happy by buying them all these expensive toys and electronics that they really can’t afford, these kids don’t need the high priced toys, they need to get outside and build a snowman or make a snow angel, or serve soup in a homeless shelter, shovel the sidewalk for the older man down the way.
This is the season of hope and miracles, at least show these children how to thank the Good Lord above.

Dear lord, I just want to say that I thank you for the breath I breathe, the opportunity to be here with my loved ones, and thank you for the good health of my loved ones, lord can you lay your hand on the hearts of the people in pain from the hurt of these hateful-assassins, Lord please put your arms around our enemies so that they can’t harm us anymore. And Lord I thank you for the time you gave me with my family and friends. In Gods name I pray,Amen.